x3 Sets Azden Pro-XD Wireless Microphones 2.4GHZ TX RX(For Parts or Not Working)
$45.00
In Stock
What's Included?
x3 Azden Pro-XD Wireless Microphones Transmitter (Parts Only)
x3 Azden Pro-XD Wireless Microphones Receiver
x2 USB Charger
x2 Lavalier Microphone
x2 3.5 Male to Female Adapters
x2 3.5 to 3.5 Cable
x1 USB B Cable
Condition
Tested and not working, microchip, antenna & battery may still be of use.
Features
- Operates in 2.4 GHz wireless range
- High gain output alleviates noise and hiss produced by low-quality camera preamps
- Mobile device compatible
- Auto sync between transmitter and receiver
- Operating range of 35 meters or more in optimal conditions
- Rechargeable internal batteries
- Wide frequency response and low internal noise
- Headphone monitor output
- Line in aux input
PRO-XD
| Operating Freq. | 2.4GHz ISM Band |
| Dynamic Range | 90dB |
| Signal-To-Noise | 80dB |
| Operating Range | 35m typical; up to 120m in ideal conditions |
| Freq. Response | 20Hz - 20kHz, ± 1dB |
| Digital Sampling | 48kHz/16bit |
| System Latency | 14ms |
| Battery Life Span | 300 cycles |
| Battery Type | Lithium-ion |
| Power Supply | USB 5V |
| Warranty | 2 Years (Registration Required) |
| Accessories | shoe mount, belt clip, lapel clip, trrs adapter, USB mini to USB-A cable, AC adapter. |
RECEIVER (PRO-XDR)
| RF Output Power | 10mW |
| Max Output Leve | 14dBV |
| Mic Output | Φ3.5mm dual-mono/stereo |
| Headphone Output | Φ3.5mm stereo |
| Output Impedance | Mic: 600Ω; Headphone: 16Ω |
| Battery Life | 16 hours |
| Battery Charge Time | 3 hours |
| Dimensions | 48x79x14mm (W/H/D) |
| Weight | 68g |
TRANSMITTER (PRO-XDT)
| RF Output Power | 10mW |
| Mic Input | Φ3.5mm mono TRRS |
| Aux Input | Φ3.5mm stereo, line level |
| Input Impedance | Mic: 2.2kΩ; |
| Aux: 10kΩ | |
| Max Input | 300mV RMS |
| Battery Life | 11 hours |
| Battery Charge Time | 3 hours 30 min |
| Dimensions | 48x79x14mm (W/H/D) |
| Weight | 62g |
MICROPHONE (EX-503XD)
| Mic Element | Electret Condenser |
| Polar Pattern | Omni-Directional |
| Freq. Response | 30Hz - 20kHz |
| Sensitivity | -46dB at 1kHz (0dB=1V/Pa) |
| Impedance | 2.2kΩ (at 1kHz) |
| Power Requirement | Plug-in power DC 1-10V; |
| Connector Type | Φ3.5mm TRRS |
| Cord Length | 105cm |
About Us
- Proudly Australian owned & operated - operating online & from our Sydney HQ since 2001!
- All our listings are in stock & available, ready to ship to you!
- Contact us via eBay messages
Shipping Options
- Domestic Shipping:
- Express Shipping is available at an extra cost - we will select the best shipping method for your order. Your express order may be sent via Australia Post Express Post, or a Courier service of our selection.
| SKU | N1289 |
| Brand | Azden |
| Unit Of Measure | ea |
Be The First To Review This Product!
Help other excess-camera-gear users shop smarter by writing reviews for products you have purchased.
